Beautiful rectangular swimming pools in France. Hydro-Kit International swimming pools are not only manufactured in France but are also of french design. The Hydro-Kit is a well engineered and well constructed pool. There is a choice of filtration; cartridge, sand or slip over unit - ideal for DIY as no liner cutting is required for the slip over unit. Use a sand filter with new Glass Media for filtration as good as DE but without the hassel.
With the Hydro-Kit International swimming pool, there is also a choice of steps; walk in steps inside the pool, Roman End, or simple stainless steel steps.
Corner fillets enable effective water movement and filtration. There are no dead areas of water movement in a Hydro-Kit International pool.
For all Hydro-Kit International swimming pools in France, contra nage is available (swimming against a current). This is available in 3 different levels, 45, 54 and 75 cubic metre/hour.
The Hydro-Kit International pool is a block pool, constructed with blocks, reinforced with metal trellis and concrete. Wall insulation is provided by the blocks. There is also a special locking system for the liner to ensure it is not pulled out inadvertantly.
Wall height can be set at 1.25m, 1.5m or 1.75m. A deep end is incorprated by adding a shelf at one end.
An 8x4 Hydro-Kit with Roman End, fully installed in Limousin, costs 18591€ tax included.
This pool is also suitable for DIY installation.
If you want a salt pool and are worried about the new bylaws in France, the Hydro-Kit International swimming pool is a self contained unit when used with cartridge filtration.
This is a robust liner pool built to last. The JEP unit for pools in France can easliy be fitted to a Hydro-Kit International swimming pool to ensure ease of chemical management.
This pool can also be fitted with a contra-flow system. Or, for a pool without any chemicals at all, have the Ecosmarte system fitted.
Do not miss out on an installation for 2009, book now for you pool in France for next summer's leisure pleasure.